Personnel Badge


This wearable badge combines three functions into a single device:
• Location Tracking – The badge reports its location up to four times per second, allowing you to track users in real-time with high accuracy.
• Safety – A flashing LED and audible beep notifies the user of safety alerts. Additionally, the screen displays warning details.
• Communication – The display screen and call button let the user receive and acknowledge messages and warnings. Text messages can be sent to the device manually or automatically.


Part Number
9000-0601
Dimensions 66 x 48 x 23 (mm)
Accuracy 20cm
Max Position Reporting Frequency 4Hz
Display Yes
Local Alarm Yes
Over the Air Firmware Update Yes
Battery Life

Active-3 days

Idle-20 days

Applications Personnel location tracking
Features

Safety alerts (LED + audio)

Text, LED- and audio-based communication
Fact Sheet Personnel Badge Product Fact Sheet


Asset Tag

Our asset tag works within the RLTS network to track and locate assets. From job sites to warehouses, the asset tag is designed for simple attachment to equipment, tools and pallets.

Part Number
9000-0501
Size 38.4 x 53.0 x 22.6 (mm)
Accuracy 20cm
Max Position Reporting Frequency 0.2Hz
Display No
IP Rating IP65
Local Alarm No
Over the Air Firmware Update Yes
Battery Life 1 Year
Applications Asset Traking
Features Long Battery Life
Fact Sheet Asset Tag Product Fact Sheet

General Purpose Tag

Versatile and configurable, the General Purpose Tag can be used to track assets, vehicles and people.


Features 


Flexibility
The tag supports uplink, downlink and two way TDoA communication depending on your needs. Update rates are configurable, giving you a versatile tag that can be used to track fast moving vehicles and people as well as equipment and inventory.
Sensor, Actuator and Alarm Interface
Use the tag’s open interfaces to integrate it with your own sensors and actuators. You can also configure the tag to generate alarms based on external feedback. 

Communication
The LED flashes can communicate status updates, notifications and hazards. The push button can be configured to generate emergency calls or other outputs.

Low Maintenance
The battery lasts up to 3 years, making asset tracking easy.


Part Number
9000-0705
Dimensions 66 x 48 x 23 (mm)
Accuracy 20cm
Max Position Reporting Frequency 4Hz
Display No
Local Alarm Yes
Over the Air Firmware Update Yes
Battery Life

Personnel or vehivle tracking-7 days

Asset Tracking-3 years

Applications General purpose tracking – people, vehicles, assets
Features

Long battery life

Low cost

Safety alerts

4-pin sensor/alarm interface
Fact Sheet General Purpose Tag Product Fact Sheet


RTLS Module


The RTLS Module is a fully-functional real-time location system (RTLS) subsystem in a compact form factor. The self-contained module delivers all RTLS functions including high-accuracy positioning and data communication over the Redpoint UWB network — without the need of additional hardware.

The module allows Redpoint partners and customers to design their own location tags, or add real-time location and two-way data communication capability to existing products.


Features


UWB radio for communications and positioning
Built-in IMU for power management, positioning and gesture recognition
Over-the-Air firmware updates
Proprietary protocol stack embedded to communicate with Redpoint RTLS network
Positioning engine that delivers up to 20cm accuracy
Onboard power management, single rail 3.3V power input
UART interface to connect to external processors or user peripherals
Configurable GPIOs allow both digital IOs, analog inputs and serial buses
NFC support (requires external antenna)
Pre-certified for FCC, IC, CE, and CMIIT


Part Number
9101-0700
Size 32 x 23 x 3.1 (mm)
Supply Voltage 2.8V to 3.6V
Interface
UART interface 6 GPIO pins, configurable as analog inputs, digital IOs, interrupts or serial interfaces
Assembly Process Compatible with SMT assembly process
Operational temperature
-40 °C to 85 °C

Fact Sheet

RTLS Module Product Fact Sheet

Vehicle Mount Tag


The Vehicle Mount Tag (VMT) brings location-awareness to vehicles including material-moving forklifts.
Take advantage of the accuracy and fast response time to improve safety by alerting operators of danger or safety violations, such as speeding or potential collision with other vehicles, people or infrastructures.
In addition to collision detection, location-awareness also improves productivity and efficiency through route-planning and location-based task management.
Please note: The vehicle mount tag does not include a CAN bus interface. To request information for the vehicle tag with CAN-bus support, contact us at info@redpointpositioning.com.


Par Number
9000-0710

Dimensions

110 x 83 x 31 (mm)
Weight 125g
Accuracy 20cm
Response time <0.2 second
Vehicle Powered
Connects directly to the vehicle power
IP Rating No
Universal Alarm LED light strip and buzzers
Over the Air Firmware Update Yes
Battery Life 187 Hours (at 1 Hz update rate)
Applications Vehicle tracking
Features

Vehicle Powered

Wireless connectivity

Reliability: Design for harsh operation conditions

Attaches Easily

Fact Sheet Vehicle Mount Tag Product Fact Sheet

IP Rated PoE Anchor


The IP-rated Power-over-Ethernet Anchor forms the infrastructure of Redpoint’s ultra-wideband, RTLS solution. Using a custom configuration of these

waterproof radio anchors, you can create a dynamic network that enables communication with any UWB device– such as the Redpoint asset tag or badge tag–located within the network.

Features


Accuracy
up to 20cm (8”) accuracy in two dimensions
Range
omnidirectional coverage with 50m (170’) range for easy integration with UWB network
Power
power-over-ethernet provides constant DC power as well as data connectivity when connected to a switch
Easy to update
over-the-air updates provide full upgradeability and customized configuration


Part Number
9000-0411
Typical Accuracy
20cm
Size 126mm x 71mm x 33mm
Temperature
-20°C to 70°C
IP Rating
IP65
Product Fact Sheet /data/attachment/2019-10/2019102302304415717k.pdf

Indoor Ceiling Mount Anchor

The Indoor Ceiling-Mountable (ICM) Anchor is a fullfunction ultra-wideband (UWB) anchor designed to be deployed indoors. It is the basic element of the infrastructure network for Redpoint’s UWB real-time location system (RTLS) solution. The anchors form a dynamic mesh network that locates and tracks UWB tag devices, such as the Redpoint asset tag and badge tag.

Feature

Accurate
up to 20cm (8”) accuracy in two dimensions
Wide Coverage
omnidirectional coverage with 50m (170ft) range for large-scale deployments.
Power-over-ethernet
power-over-ethernet provides constant DC power as well as data connectivity when connected to a switch.
Easy to update
over-the-air updates for upgrading and configuration.
Easy to Install
easy installation with two options to mount this product: an I-beam clamp, or screwed directly into your ceiling.


Part Number 9101-0701
Typical Accuracy
20cm
Size
Ø140.0 x 67.0 (mm)
Temperature
-20°C to 70°C
Product Fact Sheet
/data/attachment/2019-10/2019102303045915753v.pdf


Indoor PoE Anchor



The Indoor Power-over-Ethernet Anchor Gen.2 forms the mesh infrastructure of Redpoint’s ultra-wideband (UWB), RTLS solution. Using a custom configuration of these wall-mounted radio anchors, you can create a dynamic network that enables communication with any UWB device – such as the Redpoint asset tag or badge tag – located within the network.

Features


Accuracy

up to 20cm (8”) accuracy with a two-dimensional network configuration
Range
omnidirectional coverage with 50m (170’) range to create the UWB mesh network
Power
power-over-ethernet provides constant DC power as well as data connectivity when connected to a switch
Easy to update
over-the-air updates provide full upgradeability and customized configuration



Part Number 9000-0411
Typical Accuracy
20cm in optimal conditions
Anchor
87mm x 67mm x 27mm
Temperature
-20°C to 70°C

Product Fact Sheet

/data/attachment/2019-10/2019102302015915741b.pdf

ACCURACY, SCALABILITY AND REAL-TIME LOCATION

We help you manage your moving world.

关 闭